Not doing so could cause a burn or electric shock. Do not look away from the needle while operating the sewing machine. Your data will be kept for as long as necessary for the purpose for which it was collected and it will be deleted completely on your request. We strive to minimize the environmental impact of our products by continuously improving product design and our manufacturing methods. I accept the Terms and Coditions. The red mark a on the bobbin case should be in the position, as shown in the diagram. Quick Overview Ergonomic Design: This amount is subject to change until you make payment.

If the needle breaks it could cause an injury. Straight stitch Turn the handwheel towards yourself to raise the needle. Pass the thread through the take-up lever. Select one pattern from No. To print the manual completely, please, download it. Page 26 Thread cutter on the presser bar Line up two threads and cut with the thread cutter on the presser bar.

Doing so could cause an injury to your hand. Page 26 Thread cutter on the presser bar Line up two threads and cut with the thread cutter on the presser bar.

Toyota SP 10 Series Ergonomic Electric Sewing Machine | eBay

Turn the handwheel towards yourself to raise the needle in the highest position. Take-up lever Turn handwheel towards tkyota to raise take-up lever. At end of life please dispose of this product in an environmentally responsible way. Slider Turn the handwheel towards yourself to lower the needle into the fabric.


Winding The Lower Thread Do not touch the lower thread winding spindle when winding the lower thread. Spool cap Position the felt, the thread spool and the spool cap on to the spool pin.

Page 28 Sewing tube-shaped fabrics Pull out the extension table accessory box in the direction of the arrow.

Toyota SPB15

Thread cutter Reverse sewing Reverse sewing is performed at the beginning and the end of sewing to prevent the thread from unraveling. Aisin Europe will use your personal information to administer your account, to update you and provide the products and services you have requested from us.

Before winding the lower thread, install it in the battery holder on back of sewing machine. I agree that my personal information will be stored with Aisin Europe and will be used to contact me. First sew the left side of the zipper. Also See for SP10 Instruction manual – 44 pages. Read more about the condition.

No grounding means are provided on a double-insulated product nor should a means for grounding be added to the product. Easy upper thread set up, Printed indications on body 2. If you give the sewing machine to someone else, also give.

TOYOTA SP10 Instruction Manual

Pass the eegonomic through the take-up lever. Table of Contents Add to my manuals Add. Zigzag sewing foot Originally attached to the sewing machine Position the fabric so that the Right needle entry point Not doing so could cause a burn or electric shock. Page 22 Installation Position the presser foot pin directly below the groove in the presser foot holder.


Turn the handwheel towards yourself to sewjng the needle. Quick bobbin winding system, Battery powered bobbin winder, One battery can wind up at least bobbin. Don’t show me this message again.

TOYOTA SP10 | eBay

Page 40 Attaching the Bobbin Case Install the bobbin case from the front. Got it, continue to print. Remove tpyota power plug from the outlet when changing the presser foot. Be sure to dispose of them in a safe place away from children.

An item that has been previously used.

Align the red mark a and b, and attach the needle plate with the projection c on the bobbin case positioned as shown in the diagram. Don’t have an account? Page 36 Sew until just before the presser foot makes contact with the slider, and tiyota stop the sewing machine. Add to watch list.